E-GJ3230 tool microscopeA tool microscope is a mechanical optical instrument based on optical (microscope) aiming and coordinate (workbench) measurement. It can be used to measure various lengths and angles, and is especially suitable for measuring various complex tools and parts, such as threads. , cam profile, cutting tool and hole spacing, etc., the application range is very wide. They all have the basic characteristics of tool microscopes. In addition to differences in measurement range and graduation value, other differences include the load-bearing capacity of the workbench, the type and quantity of accessories, and the accuracy of the instrument.

E-GJ3230 tool microscope

Tool microscope is a type of microscope mainly used for measurement and metrology. It is different from general microscopes mainly in that the workbench has very high operating accuracy and is equipped with some special eyepieces for measuring plane and even three-dimensional data. Huaxian Optics E-series tool microscopes are essential instruments for inspection, analysis and research in electronics, metal materials, minerals, geology, precision engineering, etc. They are suitable for teaching, scientific research, industry and other fields. Coaxial epi-illumination system 12V/50W epi-illuminator and infinity flat field long working distance metallographic objective provide you with the best image quality and brightness. It adopts marble base, high-precision mobile working platform, z-axis electric focusing, no need to stand for operation, and the body is equipped with anti-shock and anti-shake function.

E series tool microscopes are available in manual/automatic measurement modes; automatic measurement enables automatic measurement and programming.



E-S5040 Tool Microscope

Features:

1. EOC infinity optical system, perfectly corrects various chromatic aberrations;

2. Infinity plan achromatic long-distance objective lens;

3. Program-controlled LED cold light source (surface light and contour light) can realize self-adjusting of light source intensity during programmed batch inspection;

4. All three axes are driven by precision screw rods, with no gap, higher repeatability and longer life than the polished rods commonly used in the industry;

5. Vision2D measurement software realizes 2D measurement of images and adds Z-axis data annotation and saving;

6. Adopt fully closed-loop control to ensure both positioning accuracy and repeatability.

Gantry measuring microscope

The tool microscope is the most basic precision optical measuring instrument. The instrument is equipped with a variety of accessories. It is also equipped with different magnifications so that even small workpieces can be accurately measured. The large tool microscope is a multi-purpose measuring instrument widely used in the metrological departments of factories, scientific research institutions and colleges and universities. As a basic tool for product identification in tool manufacturers, it is widely used in electronic components, precision molds, precision tools, springs, plastics, rubber, oil seal check valves, camera parts, automobile parts, PCB processing and other fields. It mainly performs two-dimensional measurement, and can also perform three-dimensional auxiliary measurement. Inspect the surface condition of the workpiece and measure the angle, length, etc. In addition, it can also be used as an observation microscope to use relative measurement methods to check the surface roughness of workpieces and other non-contact measurements in various precision processing industries.